Effects of applied voltage on the mean diameter of electrospun polyaniline (PANI) -Elastomeric adhesive fibers
Date
4-2010
Degree
Bachelor of Science in Applied Physics
College
College of Arts and Sciences (CAS)
Adviser/Committee Chair
Marvin U. Herrera
Request Access
To request access of this material, please email the administrator at uscs-mainlib.uplb@up.edu.ph
Abstract
The effects of applied voltage on the mean diameter of electrospun polyaniline-elastomeric adhesive fibers were investigated. Polymeric solutions composed of equal volume of dimethyl sulphoxide-dissolved polyaniline and elastomeric adhesive were prepared. These solutions were drawn into fibers by electrospinning with different applied voltages of 20, 30, 40, 50, and 60 kV. Scanning Electron Microscopy (SEM) images, together with fiber diameter measurements, showed that as the applied voltage was increased, the mean fiber diameter of the electrospun fibers also increased. The increase in mean fiber diameters was attributed to shortened flight time of the jets produced during electrospinning, increased deposition rate and bead formation, which contributed to the increase in fiber diameters
Language
English
Location
UPLB Main Library Special Collections Section
Recommended Citation
Emralino, Francis Murillo M., "Effects of applied voltage on the mean diameter of electrospun polyaniline (PANI) -Elastomeric adhesive fibers" (2010). Undergraduate Theses. 312.
https://www.ukdr.uplb.edu.ph/etd-undergrad/312
Document Type
Thesis