Parametric study on the effect of different process parameters on aeration efficiency in batch stirred tank reactor using aqueous sucrose solution
Date
12-2014
Degree
Bachelor of Science in Chemical Engineering
College
College of Engineering and Agro-Industrial Technology (CEAT)
Adviser/Committee Chair
Jerico Z. Alcantara
Restrictions
Restricted: Not available to the general public. Access is available only after consultation with author/thesis adviser and only to those bound by the confidentiality agreement.
Abstract
A gas-gas liquid dispersion experiment on aqueous sucrose solution was conducted for preliminary analysis on the effect of physicochemical properties and process parameters on volumetric oxygen mass transfer coefficient using a batch stirred reactor. Three (#) parameters were investigated in the parametric study which include sucrose concentration, sparger hole diameter, and sparging rate. The dissolved oxygen concentration was determined using an electronic DO meter. Statistical analysis using Analysis of variance showed that sucrose concentration and sparging rate were the significant parameters. The highest oxygen mass transfer coefficient (0.0162s-1) was obtained at low sucrose concentration operated at sparging rate of 1L/min using a 1 mm hole size orifice sparger. The highest aeration efficiency of 75.91% was determined using the same treatment. Further investigations on the effect of temperature and agitation rate and the presence of microorganisms were recommended.
Language
English
Location
UPLB College of Engineering and Agro-Industrial Technology (CEAT)
Call Number
LG 993.5 2014 E62 /R58
Recommended Citation
Rivas, Ariel N., "Parametric study on the effect of different process parameters on aeration efficiency in batch stirred tank reactor using aqueous sucrose solution" (2014). Undergraduate Theses. 3847.
https://www.ukdr.uplb.edu.ph/etd-undergrad/3847
Document Type
Thesis