Follow

Theses/Dissertations from 2016

Synthesis and characterization of composite film from abaca hybrid 7 cellulose acetate blend and polyaniline, Lara Mae R. Lumbres

Investigation on the compressive strength of concrete with rice hull ash as partial replacement for cement and ceramic tiles as partial replacement for coarse aggregates, Niko Manuel V. Maestro

Comparison of a 50-W monocrystalline and a 50-W polycrystalline silicon solar photovoltaic module based on the current and voltage harmonic distortion of a 22-W non-linear load, Rachelle Ruth D. Magbuhos

Comparison of a 50-W monocrystalline and a 50-W polycrystalline silicon solar photovoltaic module based on the current and voltage harmonic distortion of a 22-W non-linear load, Rachelle Ruth D. Magbuhos

A product design study of slide switch: a layout light switch, John Derick S. Magpantay

Parametric study on the transesterification of palm oil using waste eggshell-derived calcium oxide impregnated with sodium hydroxide with tetrahydrofuran as co-solvent, Patricia Kaye U. Magtagñob

Quantitative risk analysis and contigency estimation of DPWH standard three storey school building using Monte Carlo Simulation., Jennilyn C. Maligaya

Parametric study on ethanol production of a yeast isolate (1-TBF7y-1) using final molasses as fermenting medium for alcoholic beverages, Mark Bien L. Malonzo

Development of an android-based paper chromatography analyzer through digital image processing, Jerico P. Manalastas

Development of an android-based paper chromatography analyzer through digital image processing / Development of an android-based paper chromatography analyzer through digital image processing, Jerico P. Manalastas

Increasing utilization of owned scaffolding materials through improvement of the inventory management system at Shell Tabangao Refinery, Batangas City, Philippines, Renzo Robert c. Manalo

Comparative analysis of 37.5 kVA CU-CU and 37.5 kVA CU-AL distribution transformers manufactured by First Philec Inc., John Michael B. Manrique

Comparative analysis of 37.5 kVA CU-CU and 37.5 kVA CU-AL distribution transformers manufactured by First Philec Inc., John Michael B. Manrique

Lead time management of product X through lean management at Solids Plant, Amherst Laboratories Inc., Biñan, Laguna, Philippines, Mary Anne R. Manzano

Analysis of the travel demand and trip patterns of constituents and visitors of Maquiling School Inc. in Los Baños, Laguna, Philippines., Shiela Marie C. Masong

Regional variability analysis of the unit cost of irrigation development under the National and Communal Irrigation Systems in the Philippines, Jayvee L. Matanguihan

Determination of factors affecting the learning rate of workers in the food processing industry, Luzette Ann V. Matanguihan

On-line partial discharge monitoring of hydrogenerators using qualitrol partial discharge analyzer-IV (PDA-IV) done by Superserve Corporation, Philippines, Prince Teomel G. Matel

On-line partial discharge monitoring of hydrogenerators using qualitrol partial discharge analyzer-IV (PDA-IV) done by Superserve Corporation, Philippines, Prince Teomel G. Matel

A field practice report at the International Rice Research Institute (IRRI) with focus on the development of an Arduino-based automatic fan control device for grainpro solar bubble dryer, Charmine Diann S. Mejia

Greenhouse gas (GHG) baseline inventory in Milaor, Camarines Sur, Philippines, Charles William O. Menes

Alternative weight determination of mango (Mangifera indica L.) by natural frequency analysis, Jerson Jose T. Menguito

Optimal capacitor placement and sizing on the feeder IV of the distribution system of Tablas Island, Romblon Philippines using loss sensitivity analysis, Reggae R. Mercado

Parametric study on solvent extraction of oil from petroleum nut (Pittosporum resiniferum Hemsl.) using hexane as solvent, Patricia Marie M. Millena

Comparative study on direct and indirect analysis of cane quality for raw sugar and final molasses distribution for crop year 2013-2014 at Central Azucarera Don Pedro Inc. (CADPI), Nasugbu, Batangas, Philippines, Minette B. Mimay

Productivity assessment of precast concrete elements of Megawide Construction Corporation using data envelopment analysis, Erwin Mark A. Nerizon

Optimization of a disk-and-doughnut static-mixer reactor for biodiesel production using waste cooking oil, Christian Dewin V. Nery

Wastewater treatment of greywater using a vertical subsurface flow constructed wetland planted with yellow buho (Schizostachyum brachycladum (Kurz) Kurz) with varying hydraulic retention time, John Paul Angelo G. Nocedo

Comparative analysis of ring bus and breaker-and-a-half switchyard configuration of Burgos Wind Farm, Ilocos Norte, Philippines using ETAP 11.1.1 done by EDC, Marvin James L. Non

Comparative analysis of ring bus and breaker-and-a-half switchyard configuration of Burgos Wind Farm, Ilocos Norte, Philippines using ETAP 11.1.1 done by EDC, Marvin James L. Non

Voltage stability analysis of NGCP Tayabas substation, Quezon Province using power system analysis toolbox, Mark Angelo O. Noriel

Voltage stability analysis of NGCP Tayabas substation, Quezon Province using power system analysis toolbox, Mark Angelo O. Noriel

Condition-based maintenance of the carbon brush in unit 1 generator exciter at Apri-Makban Geothermal Power Plant, Philippines, Joshua Angelo M Ocampo

Condition-based maintenance of the carbon brush in unit 1 generator exciter at Apri-Makban Geothermal Power Plant, Philippines, Joshua Angelo M. Ocampo

Optimization of Otake FC2K impeller huller settings for milling of Indica Rice (Oryza sativa L.) varieties in the Philippines, Mike Lorenzo G. Oleta

Development of linux distribution-based graphical magnetic field display opengl application through a real-time alternating current input of a fixed length straight wire, Philipglo Joshua B. Opulencia

Estimation of harvesting dates of rice (Oryza sativa L.) in Nueva Ecija, Philippines using growing degree days and remotely sensed images, Felix Victor A. Palacio

Prediction of sugarcane (Saccharum offcinarum L.) yield in Balayan Mill District, Batangas, Philippines using MODIS NDVI., Janina Gaile M. Palad

The effect of clear zone size to driver speed and lateral positioning on the road in UPLB, Marjo Dave O. Palado

Growth and phycocyanin pigment responses of Sprinula platensis Gomont BIOTECH 4012 cultivated in polyethylene photobioreactors, Norman James F. Panganiban

Information systems development and improvement of the consignment operations of FLSMIDTH Philippines Inc., Pasig City, Nicole Elizabeth B. Paras

Comparative performance of flocculating and non-flocculating strains of Saccharomyces cerevisiae in chemostat culture, Aleli Ann T. Paule

Development and bioreactor testing of an evolutionary engineered strain of thermotolerant and xylose-utilizing Saccharomyces cerevisae for biofuel ethanol production, John Paul S. . Penuliar

Investigation on the compressive strength of concrete with high percent replacement of ceramic tile waste as coarse aggregate, Edmil Jan C. Pineda

Evaluation of the design of the proposed PV/diesel hybrid system project in Sabang, Palawan, Philippines done by DOE, Fernand Kristopher A. Pulutan

Evaluation of the design of the proposed PV/diesel hybrid system project in Sabang, Palawan, Philippines done by DOE, Fernand Kristopher A. Pulutan

Climate change projections under different greenhouse gas emission scenarios and its effect on corn (Zea mays L.) water requirement in Isabela, Philippines, Katarina Nievla N. Ragotero

Drought vulnerability assessment of sugarcane (Saccharum officinarum L.) in Batangas, Philippines using GIS and remote sensing, Eunice G. Ramirez

Visual evaluation and cost analysis of the jet grouted pile foundations of the Lloyd T. Evans plant growth facility, IRRI, Los Baños, Philippines, Mark Anthony DB Ramos

Growth performance of hydroponically grown lettuce (Lactuca sativa L.) using vinasse as nutrient solution, Quincel E. Ramos

Field practice report on the nutrient solution management of hydroponic lettuce (Lactuca sativa L.) and bell pepper (Capsicum annuum L.) production at Leisure Farms Tagaytay, Inc., Amadeo, Cavite, Philippines, Clarisse Joyce L. Regalado

Effect of filter media variation on vertical subsurface flow constructed wetlands planted with vetiver grass (Chrysopogon zizanioides) for piggery effluent treatment of University Farm, UPLB, Sharmaine R. Remos

Analysis on the performance incentive scheme for privately owned distribution utilities done by ERC, Philippines, Jenny Rose V. Repollo

Parametric study on the growth and ethanol production of amylase-producing yeast isolate BIOTECH Rttwy-2 using Taro (VG-9) flour as substrate, Princess J. Requiso

Parametric study on ethanol fermentation of sweet sorghum [Sorghum bicolor (L.) Moench 'SPV 422'] syrup using Saccharomyces cerevisiae 2011, Ma. Regina G. Resol

Project-scale cost analysis of using concrete hollow blocks (CHB) with plastic pellets., Eriz Joanne G. Reyes

Structural design and cost estimation of the proposed anaerobic digester in the upcoming coral waste-to-energy facility of Sure Inc., Jade Alec L. Reyes

Field practice report on the environment control operations in bell pepper (Capsicum annuum L.) greenhouse at LFTI, Amadeo, Cavite, Philippines, Cherry Mae L. Rivera

Optimization of silver recovery from used radiograph films (URF) via sodium hydroxide stripping, Joshua Bon A. Roco

Field practice report on the light transmission in lettuce (Lactuca sativa L.) greenhouse at Leisure Farms Tagaytay Inc. (LFTI), Amadeo, Cavite, Philippines, Maiden Kieth P. Rodriguez

Correlation analysis of financial resources allocation for irrigation development and actual irrigated areas under the national and communal irrigation in the Philippines, Christine Mae O. Roguel

Analysis and design of the solid waste management in Dolores, Quezon, Philippines, Ralph M. Romero

Design, fabrication, and testing of flyback converter modules for DC-DC converter laboratory exercises, Marion Joseph F. Ronquillo

Investigation on the compressive strength of concrete with high percent replacement of ceramic tile waste as fine aggregate, Paolo N. Ruedas

Synthesis and characterization of antibacterial paper with nanostructured zinc oxide particles prepared through microwave irradiation technique, Saberina I. Saberon

Water delivery performance of PVC airlift pumps of different pipe sizes and configurations, Erna Jean B. Sacbibit

Comparative analysis of field-saturated soil hydraulic conductivity (K?s) estimates from five pedotransfer models, Jeric S. Sadsad

Evaluation of the design of warehouse picking process through simulation in Fast Services Corporation-South Distribution Center, Calamba, Laguna, Philippines., Inah Clarissa R. Salazar

Assessment of selected buildings and road facilities in UPLB regarding their compliance with accessibility law for persons with disability (Batas Pambansa Bilang 344), Krizie Anne H. Sales

Improvement in production inventory management through Information System Analysis in Techno Moldplas (Phils.), Inc., Calamba City, Laguna, Sarah Jane H. Sanchez

Investigation on the split tensile and flexural strength of concrete with high percent replacement of ceramic tile wastes as fine aggregate, Jhoriel M. Santisteban

Performance evaluation of a small-scale multi-bladed Horizontal Axis Wind Turbine (HAWT), Ninoy Mandela Kalima P. Serrano

Assessment of selected office buildings in UPLB as green buildings using EDGE software, Grizel Jan M. Serrato

Assessment of a possible 5-megawatt solar photovoltaic power plant in the University of the Philippines Los Baños, Romelle Michael B. Silva

Assessment of a possible 5-megawatt solar photovoltaic power plant in the University of the Philippines Los Baños, Romelle Michael B. Silva

Assessment of a possible 5-megawatt solar photovoltaic power plant in the University of the Philippines Los Baños, Romelle Michael B. Silva

Improvement of overall maintenance cost of machines in CDC Manufacturing Corporation, Caloocan City, Philippines, Erick Louise SP Sioson

Parametric and optimization studies for the acetone extraction of polyphenols from mango peel, Richard B. Sison

Applied geotagging for planning of DPWH horizontal construction projects, Vincent Rafael C. Solacito

Downstream processing of red pigment from fermentation broths of Monascus purpureus M1018 by optimized pilot scale ultrafiltration followed by powderization, Erika A. Somera

Assessment of selected buildings in College of Engineering and Agro-Industrial Technology,UPLB as per provisions of fire code and National Building Code of the Philippines, Mary Jane C. Subijano

Evaluation of transformer tap changing as system voltage regulating procedure (SVRP) applied in San Esteban to Laoag 115 KV line during wet season done by the NGCP, Louie Renz A. Sucaldito

Evaluation of transformer tap changing as system voltage regulating procedure (SVRP) applied in San Esteban to Laoag 115 KV line during wet season done by the NGCP, Louie Renz A. Sucaldito

Comparative study on the removal of oxytetracycline from aqueous solution by adsorption using commercial and cacao bean shell derived activated carbon, Abraham A. Tabing

Optimization study on the thermal decarboxylation of coconut oil using bentonite as catalyst, Ma. Charlene C. Tapia

Design of proposed septage collection operations in Bocaue, Bulacan, Philippines, Michael Angelo T. Tayo

Optimization of soil washing conditions using chitosan for the removal of nickel from contaminated soil, Diane Clare M. Tiongco

Parametric study on solvent extraction of oil from petroleum nut (Pittosporum resinferum Hemsl.) using ethanol as solvent, Carla Angeline P. Trinidad

Decolorization of synthetic melanoidin solution by activated charcoal adsorption / Frances Imee T. Valdez, Frances Imee T. Valdez

Analyis of flood control measures on confluence problem in flooding occurrence for Estero de Tripa de Gallina, Manila, Philippines, Mark Allan T. Valiente

Modal response spectrum analysis of the technical vocational, building in Pedro E. Diaz High School in Muntinlupa City, Philippines, Joshua David C. Valientes

Investigation on the effect of varying dosages of fibrin 23 on the tensile strength and shrinkage of concrete, Marwin Angelo M. Vargas

Reduction of man-hour consumption and establishment of budget man-hour standard through work measurement and improvement at the panel assembly of MHPS-PHL, Bauan, Batangas., Abigail M. Villa

Design of automatic fire sprinkler system in selected UPLB buildings using density/ area method considering different types of hazard classifications, Jeremy P. Villamin

Solid waste management plan for proposed urban site in Visayas, Philippines, Rebecca T. Wong

Optimization of financial resources allocation for irrigation development in the Philippines: mathematical development and simulation, Chen Lester R. Wu

Theses/Dissertations from 2015

Investigation on the split tensile strength of concrete with coconut (cocos nucifera L.) shell as partial replacement for coarse aggregates, Axl Krizz A. Aban

Parametric study on thermal decarboxylation of coconut oil using calcium oxide as a catalyst, Nathalie Claire R. Abarquez

Investigation of Moving Bed Biofilm Reactor (MBBR) sewage treatment plant of L.T.I., Sta. Rosa, Laguna, Philippines, Sarah Ghen P. Abasolo

Analysis on the implementation of integrated room automation system in guest rooms of Conrad Hotel Manila, Pasay City, Philippines, Kennedy B. Abrasia